How To Repair Vinyl Tile Commercial Grade

Download Article

Download Commodity

Sometimes your vinyl floor tin suffer from small cuts or cracks due to normal wearable and tear and can even skin upwards at the corners if the adhesive becomes dry. If your flooring has suffered from water impairment, your floor may chimera upwards in various different sections. When your vinyl flooring has suffered major rips, tears, or burns that sealants and adhesives won't set up, y'all may be required to supervene upon the affected sections of your flooring. Regardless of the maintenance needed on your vinyl floor, there are several means to perform repairs at domicile past yourself without necessarily having to hire a contractor to practice the work.

1. 1

   Use a vacuum cleaner or broom to clear away any existing dirt or debris from the surface of your vinyl flooring where the cut or scrape is located.

   • Mop and rinse the damaged area with fresh, warm water if vacuuming or sweeping the expanse does not remove the dirt.
   • Consult the manufacturer of the vinyl floor for farther direction on cleaning products that are condom to utilise if neither of the vacuuming or mopping methods exercise not remove all the clay.

2. 2

   Apply a depression-gloss seam sealer or vinyl seam sealant to the scraped or cut areas of the vinyl flooring. ^[1]

   • These products will help fill and seal whatever scrapes or cuts, preventing the lower layers of the vinyl flooring from deteriorating further.

   Ad

1. 1

   Use a utility knife to make a cut directly down the length of each chimera in the middle.

   • If your vinyl flooring has produced bubbling as a result of water impairment, look until the flooring has dried completely before making any cuts.

2. 2

   Use a squirt canteen or a mucilage syringe to squirt vinyl floor adhesive into each cut y'all have produced in the center of each bubble. ^[2]

3. 3

   Use a tool such as a plastic putty knife to spread the adhesive around evenly beneath each bubble location.

4. 4

   Remove any excess agglutinative from outside of the cutting in the vinyl flooring using a make clean rag.

5. 5

   Utilise a rolling pin or like object to roll across the adhesive spots in the vinyl flooring to make information technology stick to the flooring evenly. ^[three]

6. vi

   Place an object or multiple objects, such every bit a stack of books, evenly over the unabridged spot where the agglutinative is now located and allow the flooring to dry completely.

   • Consult with the directions on the vinyl flooring adhesive packaging to determine how long it will accept for the adhesive to dry fully.

   Advertising

1. 1

   Apply a utility knife with a fresh, sharp blade to make a cutting around the tile or section of vinyl flooring yous demand to replace. ^[iv]

2. 2

   Firmly pry up the damaged flooring department using a putty knife or similar tool without damaging the surrounding flooring. ^[5]

   • If the adhesive is making the vinyl floor department hard to remove, aim a hair-dryer at the afflicted department to loosen the adhesive.

3. 3

   Obtain an extra vinyl flooring replacement tile that matches the damaged tile you removed. ^[6]

   • If your vinyl flooring is made from sheets instead of individual tiles, take the piece you cut from your floor and use information technology every bit a template to cut a new piece from a new sheet of flooring.
   • If you lot practise not have a matching vinyl floor tile, you lot may want to consider removing a tile from a location where mismatched tiles will not be seen; such as underneath your fridge or stove, or from the within of a closet.

4. 4

   Identify the new flooring tile or sheet into the empty space in the floor to make sure it fits properly and brand any necessary adjustments to its shape using the utility pocketknife.

5. 5

   Apply the indicated corporeality of vinyl flooring adhesive as directed by the manufacturer to the matching replacement tile and secure it firmly into place.

6. 6

   Apply vinyl seam sealant to any existing open seams that lack adhesive.

7. seven

   Apply a rolling pin or hand roller all over the top of the new vinyl flooring to secure it into identify and to enforce the adhesive.

8. 8

   Divert all foot traffic away from the replacement section of the vinyl floor until the adhesive has completely dried.

   Advert

Add New Question

• Question

  Is there a fashion to make a new plank look worn in so it matches the residual of the flooring?

  

  Yes. You can distress a floorboard with sandpaper, though it may exist an opportunity to re-varnish or re-wax the entire flooring, if it is in poor condition.

• Question

  If I used a caulking to fill deeper cuts, do I demand to put the seam sealer on the peak before using a polishing wax finish?

  

  If you are trying to fill a deeper cut, get-go by grouting into the groove. Wait fir the grout to dry. So simply add the caulking on meridian. For a small but deep hole you lot could even utilize woods mucilage first in the same mode as the grout. The point is to not let it sag after you have prepped for your wax finish and encompass upwardly.

Ask a Question

200 characters left

Include your e-mail accost to get a message when this question is answered.

Submit

Advertizing

• Vinyl flooring repair products, such as seam sealer or vinyl flooring adhesive, can be purchased at any specialty home repair store or any other location where vinyl floor is sold.

• If sections of your vinyl floor are peeling up at the corners, use the same repair method for repairing bubbling, but eliminate the steps for making cuts in the vinyl.

Thanks for submitting a tip for review!

Advertisement

Things You'll Need

• Vacuum cleaner or broom
• Utility knife
• Vinyl seam sealant
• Squirt bottle
• Vinyl floor agglutinative
• Plastic putty knife
• Cleaning rag
• Rolling pin
• Vinyl replacement tile or flooring sail

About This Article

Article Summary X

Repairing vinyl floor is a quick style to ready your tiles without redoing your flooring. If you accept small scrapes or cuts in your vinyl, apply a low-gloss seam sealer to seal them upwards. If you accept vinyl bubbles, utilise a utility pocketknife to make a cut straight down the length of each chimera. Then, spray vinyl flood agglutinative into each cut and spread it effectually with a putty knife. To make sure it dries flat, utilise a rolling pivot to smooth the vinyl out, then place some heavy books on summit of it until its dry out. For heavily-damaged floors, use a putty knife to pry up the damaged vinyl pieces. And then, cut new vinyl to the shape yous need, use some vinyl adhesive to the floor, and place the vinyl downwardly. Use a rolling pin to remove any bubbles and avoid walking on information technology until the glue has completely dried. To learn how to fix vinyl corners that go along coming up, read on!

Did this summary help you?

Thanks to all authors for creating a page that has been read 180,130 times.

Did this article help you?

Source: https://www.wikihow.com/Repair-Vinyl-Flooring

Posted by: harrisdreatenty.blogspot.com

Share this post